View VLMB1500_4647325.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 1 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrabright 0402 chipled description the new chipled series have be en designed in the smallest smd package. this innovative chipled technology opens the way to ? smaller products of higher performance ? more design in flexibility ? enhanced applications the 0402 led is an obvious solution for small-scale, high brightness products that are expe cted to work reliable in an arduous environment. product group and package data ? product group: led ? package: smd 0402 chipled ? product series: standard ? angle of half intensity: 65 features ? super thin chipled with exceptional brightness 1.0 mm x 0.5 mm x 0.35 mm (l x w x h) ? high reliability pcb based ? wavelength (470 to 475) nm (blue), typ. 571 nm (yellow green), (587 to 597) nm (yellow), typ. 605 nm (soft orange), typ. 631 nm (super red) ? allngap and ingan technology ? viewing angle: extremely wide 130 ? grouping parameter: luminous intensity, wavelength, v f ? available in 8 mm tape on 7" diameter reel ? compatible to ir reflow soldering ? preconditioning: accordi ng to jedec level 2a ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? backlight keypads ? navigation systems ? cellular phone displays ? displays for industrial control systems ? miniaturized color effects ? traffic displays note (1) driving the led in reverse direction is suitable for short term application parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) forward voltage (v) technology min. typ. max. min. typ. max. min. typ. max. vlms1500-gs08 super red 18 54 - 20 - 631 - - 2.0 2.4 alingap vlmo1500-gs08 soft orange 45 90 - 20 - 605 - - 2.0 2.4 alingap vlmy1500-gs08 yellow 28 - 180 20 587 - 597 - 2.0 2.4 alingap vlmg1500-gs08 yellow green 18 35 - 20 - 571 - - 2.0 2.4 alingap VLMB1500-gs08 blue 11.2 - 45 5 470 - 475 2.65 - 3.15 ingan absolute maximum ratings (t amb = 25 c, unless otherwise specified) vlms1500, vlmo1500, vlmy1500, vlmg1500 (alingap technology) parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current i f 30 ma surge forward current 1/10 duty cycle, 0.1 ms pulse width i fsm 80 ma power dissipation t amb 25 c p v 75 mw operating temperature range t amb - 30 to + 85 c storage temperature range t stg - 40 to + 85 c ired solder conditions according vishay specifications t st 260 c
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 2 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 absolute maximum ratings (t amb = 25 c, unless otherwise specified) VLMB1500 (ingan technology) parameter test condition symbol value unit dc forward current i f 20 ma surge forward current 1/10 duty cycle, 0.1 ms pulse width i fsm 100 ma power dissipation t amb 25 c p v 76 mw operating temperature range t amb - 20 to + 80 c storage temperature range t stg - 30 to + 100 c ired solder conditions according vishay specifications t st 260 c optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlms1500, super red parameter test condition symbol min. typ. max. unit luminous intensity i f = 20 ma i v 18 54 - mcd dominant wavelength i f = 20 ma d - 631 - nm peak wavelength i f = 20 ma p - 639 - nm angle of half intensity i f = 20 ma ? - 65- deg spectral line half width i f = 20 ma ? -20-nm forward voltage i f = 20 ma v f -2.02.4v reverse current v r = 5 v i r - - 10 a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmo1500, soft orange parameter test condition symbol min. typ. max. unit luminous intensity i f = 20 ma i v 45 90 - mcd dominant wavelength i f = 20 ma d - 605 - nm peak wavelength i f = 20 ma p - 611 - nm angle of half intensity i f = 20 ma ? - 65- deg spectral line half width i f = 20 ma ? -17-nm forward voltage i f = 20 ma v f -2.02.4v reverse current v r = 5 v i r - - 10 a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy1500, yellow parameter test condition symbol min. typ. max. unit luminous intensity i f = 20 ma i v 28 - 180 mcd dominant wavelength i f = 20 ma d 587 - 597 nm peak wavelength i f = 20 ma p - 588 - nm angle of half intensity i f = 20 ma ? - 65- deg spectral line half width i f = 20 ma ? -15-nm forward voltage i f = 20 ma v f -2.02.4v reverse current v r = 5 v i r - - 10 a
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 3 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 15 %. the above type numbers represent the order groups which include only a few brightness groups. only one group will be shipped on each reel (t here will be no mixing of two groups on each reel).in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, si ngle wavelength grou ps will be shipped in any one reel. in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmg1500, yellow green parameter test condition symbol min. typ. max. unit luminous intensity i f = 20 ma i v 18 35 - mcd dominant wavelength i f = 20 ma d - 571 - nm peak wavelength i f = 20 ma p - 574 - nm angle of half intensity i f = 20 ma ? - 65- deg spectral line half width i f = 20 ma ? -15-nm forward voltage i f = 20 ma v f -2.02.4v junction capacitance v r = 0 v, f = 1 mhz c j -40-pf reverse current v r = 5 v i r - - 10 a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) VLMB1500, blue parameter test condition symbol min. typ. max. unit luminous intensity i f = 5 ma i v 11.2 - 45 mcd dominant wavelength i f = 5 ma d 470 - 475 nm peak wavelength i f = 5 ma p - 468 - nm angle of half intensity i f = 5 ma ? - 65- deg spectral line half width i f = 5 ma ? -25-nm forward voltage i f = 5 ma v f 2.65 - 3.15 v reverse current v r = 5 v i r - - 10 a luminous intensity classification group luminous intensity (mcd) min. max. l11.218 m1828 n2845 p4571 q 71 112 r 112 180 s 180 280 t 280 450 color classification color group dominant wavelength (nm) min. max. yellow j 587 589.5 k 589.5 592 l 592 594.5 m 594.5 597 yellow green c 567.5 570.5 d 570.5 573.5 e 573.5 576.5 blue ad 470 475
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 4 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? forward voltage is measured with a tolerance of 0.1 v. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - forward current vs. forward voltage (super red) fig. 3 - forward current vs. forward voltage (soft orange) fig. 4 - forward current vs. forward voltage (yellow) forward voltage classification color group forward voltage (v) min. max. yellow d2 1.8 2.0 d3 2.0 2.2 d4 2.2 2.4 yellow green 41.92 522.1 62.12.2 72.22.3 82.32.4 blue 1 2.65 2.75 2 2.75 2.85 3 2.85 2.95 4 2.95 3.05 5 3.05 3.15 0 35 0 10203040 90 t amb - ambient temperature (c) i f - forward current (ma) 30 25 20 10 15 5 50 60 70 80 super red, soft orange, yellow, yellow green blue 0 50 1.2 1.6 2.0 2.4 2.8 3.2 v f - forward voltage (v) i f - forward current (ma) 40 30 20 10 s uper red 0 50 1.2 1.6 2.0 2.4 2.8 3.2 v f - forward voltage (v) i f - forward current (ma) 40 30 20 10 s oft orange 0 50 1.2 1.6 2.0 2.4 2.8 3.2 v f - forward voltage (v) i f - forward current (ma) 40 30 20 10 yellow
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 5 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - forward current vs. forward voltage (yellow green) fig. 6 - relative luminous intens ity vs. forward current (super red) fig. 7 - relative luminous intensity vs. forward current (soft orange) fig. 8 - relative luminous inte nsity vs. forward current (yellow) fig. 9 - relative luminous intensity vs. forward current (yellow green) fig. 10 - relative intensit y vs. wavelength (super red) 0 50 1.2 1.6 2.0 2.4 2.8 3.2 v f - forward voltage (v) i f - forward current (ma) 40 30 20 10 yellow green 0 2.5 0 1020304050 i f - forward current (ma) i rel - relative luminou s inten s ity 2.0 1.5 1.0 0.5 s uper red 0 2.5 0 1020304050 i f - forward current (ma) i rel - relative luminou s inten s ity 2.0 1.5 1.0 0.5 s oft orange 0 2.5 0 1020304050 i f - forward current (ma) i rel - relative luminou s inten s ity 2.0 1.5 1.0 0.5 yellow 0 2.5 0 1020304050 i f - forward current (ma) i rel - relative luminou s inten s ity 2.0 1.5 1.0 0.5 yellow green 0.0 0.2 0.4 0.6 0.8 1.0 1.2 500 550 600 650 700 750 - wavelength (nm) i rel - relative intensity super red
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 6 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 11 - relative intensity vs. wavelength (soft orange) fig. 12 - relative intensity vs. wavelength (yellow) fig. 13 - relative intensity vs. wavelength (yellow green) fig. 14 - forward current vs. forward voltage (blue) fig. 15 - relative luminous inte nsity vs. forward current (blue) fig. 16 - relative intens ity vs. wavelength (blue) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 560 580 600 620 640 660 - wavelength (nm) 95 10885 soft orange i - relative intensity rel 0.0 0.2 0.4 0.6 0.8 1.0 1.2 550 570 590 610 630 650 - wavelength (nm) 95 10881y yellow i rel - relative intensity 0.0 0.2 0.4 0.6 0.8 1.0 1.2 500 550 600 650 700 750 yellow green i v rel - relative luminous intensity - wavelength (nm) 0 50 2.5 3.0 3.5 4.0 4.5 5.0 v f - forward voltage (v) i f - forward current (ma) 40 30 20 10 blue 0 2.5 0 1020304050 i f - forward current (ma) i rel - relative luminou s inten s ity normalized at 20 ma 2.0 1.5 1.0 0.5 blue 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 350 400 450 500 550 600 - wavelength (nm) i rel - relative intensity blue
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 7 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 17 - relative luminous intensity vs . ambient temperature fig. 18 - relative luminous intensity vs. angular displacement reel dimensions in millimeters 0.1 1 10 010203040506070 t amb - ambient temperature (c) i rel - relative luminou s inten s ity blue 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 9.4 1.5 ? 13 ? 60 1 ? 178 2 technical drawing s according to din s pecication s drawing-no.: 9.800-5122.01-4 i ss ue: 2; 03.11.11 22611
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 8 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape dimensions in millimeters vlms1500, vlmo1500, vl my1500, vlmg1500, VLMB1500 a - a (5:1) a a technical drawing s according to din s pecication. u s er feed direction drawing-no.: 9.700-5388.01-4 i ss ue: 1; 20.03.12 0 . 2 0 . 4 5 0 . 0 5 cathode 8 + 0.3 - 0.1 3.5 0.05 4 0.1 ? 0.4 4 0.1 2 0.05 ? 1.55 0.05 1.75 0.1
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 9 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters vlms1500, vlmo1500, vl my1500, vlmg1500, VLMB1500 soldering profile fig. 19 - v ishay lead (p b )-free reflo w soldering profile (according to j-std-020c) bar code product label (example only) a) 2d barcode b) vishay part number c) quantity d) ptc = selection code (binning) e) code of manufacturing plant f) batch = date code: year/week/plant code g) region code h) sl = sales location i) terminations finishing k) lead (pb)-free symbol l) halogen-free symbol m) rohs symbol recommended s older pad footprint technical drawing s according to din s pecication not indicated tolerance s 0.2 drawing-no.: 6.541-5096.01-4 i ss ue: 1; 20.03.12 0.325 0 . 5 0.6 1.55 0 . 7 0 . 3 5 1 0.325 cathode 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 255 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 255 c 19470-4 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2 max. 2 cycles allowed a b d c e f g h i m l k
vlms1500, vlmo1500, vlmy1500, vlmg1500, VLMB1500 www.vishay.com vishay semiconductors rev. 1.0, 21-may-12 10 document number: 82554 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dry packing the reel is packed in an an ti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed into a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to prev ent moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22-a112 level 2a label is included on all dry bags. example of jesd22-a1 12 level 2a label esd precaution proper storage and handling pro cedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning la bels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors standard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.

▲Up To Search▲

Price & Availability of VLMB1500

	To Download VLMB1500 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .